Dalsa Piranha4 User Manual page 59

Camera Control Feature Descriptions
The following table describes these parameters along with their view attribute and minimum camera
firmware version required. Additionally the firmware column will indicate which parameter is a
member of the DALSA Features Naming Convention (DFNC), verses the GenICam Standard Features
Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a firmware revision
number.
Display Name
Internal Line AcquisitionLineRate
Rate
Measured Line measureLineRate
Rate
Refresh refreshMeasureLineRate
measured line
rate
Exposure Time ExposureMode
Source
Timed Timed
Trigger Width TriggerWidth
Exposure Time ExposureTime
Measured measureExposureTime
Exposure Time
Refreshed refreshMeasureExposureTime
measured
exposure time
TDI Stages sensorTDIStageSelection
1 1
2 2
Multi Line multiLineExposureMode
Exposure
Mode
ON ON
OFF OFF
Feature
Specifies the camera internal line rate, in Hz when
Trigger mode set to internal.
Note that any user entered value is automatically
adjusted to a valid camera value.
Specifies the line rate provided to the camera by
either internal or external source (RO)
Press to show the current line rate provided to the
camera by either internal or external sources
Sets the operation mode for the camera's exposure
(or shutter). (RO)
The exposure duration time is set using the
Exposure Time feature and the exposure starts with
a LineStart event.
Uses the width of the trigger signal pulse to control
the exposure duration.
Sets the exposure time (in microseconds) when the
Exposure Mode feature is set to Timed.
Specifies the exposure time provided to the camera
by either internal or external source (RO)
Press to display the current exposure time provided
to the camera.
Selects the number of lines to be imaged
Single Line
Dual Line
Selects Multi Line exposure mode
For independent exposure control of each line
For TDI stage = 1, 2 or Area mode
Description Device
Version
& View
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
DFNC
1.00
Beginner
DFNC