Hooker Furniture Torres SS640-PHZ1-088 Assembly Instruction

Thank you for purchasing this quality product. Be sure to unpack carefully looking for small parts which may have come loose during
shipment. Read all instruction and study the drawing carefully before starting the assembly process.
Inside the carton you will find two red plastic bags that have the recliner's wings in it. Remove the wings from the plastic bag and set
them aside to be used in assembly and installation
CAUTION: Make sure to read the instructions below before assembling your double power recliner. We suggest two
people be used in the assembly of your double power recliner.
A×1
C
Ensure both clips on back are
aligned, then press top of back
frame downward until a clicking
sound is heard.
Do Not plug the power cord into a power outlet until your funiture is fully assembled and in place.
Notes:
1) To help prevent shock and or damage to your product only plug the power cord into a grounded outlet.
2) Read the operating instructions carefully before operating your funiture.
IMPORTANT NOTE
·To avoid any risk of suffocation to children or pets, dispose of all plastic bags immediately.
·To ensure proper performance, occasionally check for loose screws and tighten as needed.
ASSEMBLY INSTRUCTION
ITEM:SS640-PHZ1-088 Torres PWR Recliner w/PWR Headrest
B×1
C
A
B
1 / 2
C×2
D×1
Headrest
The headrest leadwires are yellow.
D
Not Included