Hooker Furniture Seven Seas Style EC216 Operational Instructions

Seven Seas Style:EC216 Operational Instructions
Carefully unpack all parts and identify them with parts list and
assemble the chair following the Assembly Instructions.
Put the chair onto a flat floor then you can sit onto and adjust the
reclining and the seat height..
1. Please sit down onto the chair and use the left handle (A) to adjust the
reclining of the chair, and use the right handle (B) to adjust the height of it.
2. Turn the left handle (A) upward and the chair is active to recline .Get a
desired tilt and release the left handle to lock it. You can lock at several
different tilt angles by reclining your body.
3. Turn the right handle (B) upward to get an active cylinder for adjusting
C
the height of the chair. Raise your body up, the seat will be lifted up to a
desired height by the cylinder. To get a lower height, please sit down with
the right handle (B) turning upward. Release the right handle (B) to lock
the cylinder when get a desired seat height.
B

Parts As Shown

A
A. Left handle
B. Right handle
C. Mechanism
D. Base set
D