Motion Image Improvement With Interlaced And Non-Interlaced (Progressive) - Eizo SCD 19102 Instruction Manual

Commissioning
7.4 System settings
3. Save timing by selecting "Save custom settings" and confirming with key 2.
4. The saved timing is now identified by a "1" in "Save custom settings".
If a "3" has been selected in "Custom settings number", the third digit of "Save custom
settings" is set to "1".
Saved timings can be overwritten at any time.
Note
Up to five timings can be saved in the menu line "Save custom settings".
7.4.6.6

Motion image improvement with interlaced and non-interlaced (progressive)

If the setting "For motion pictures" is selected and "Force" is carried out in the Force-Mode
menu "Blind mode" or "Live mode", the menu line "Motion image improvement" is displayed
with the setting "Inactive".
● If the motion image improvement is to be activated, the setting for this must be changed
from "Inactive" to "Active" either in the "Servicelevel 2" → "Others" menu or in the
Force Mode menu "Blind mode" or "Live mode".
80
SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004