Table of Contents
Advertisement
3. Specify the setting using
4. Select
Attention
• Using this function may prevent some color gradations from being able to be displayed.
Note
• The minimum value (-100) changes the screen to monochrome.
2.4.9 Adjusting the gain
The brightness of each red, green, and blue color component is referred to as "Gain". The
hue of "White" can be changed by adjusting the gain.
Settings: "0%" – "100%"
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Gain" and then
3. Select the color to be adjusted from "Red", "Green", and "Blue", then select
4. Specify the setting using
5. Select
Attention
• Using this function may prevent some color gradations from being able to be displayed.
Note
• The gain value changes according to the color temperature.
• When the gain is changed, the color temperature setting changes to "User".
2.5 Enabling or Disabling Sharpness Recovery (the Function of
Correcting Image Clarity)
EIZO's unique technology called "Sharpness Recovery" improves picture clarity and
displays images that are true to the original source data.
1. Select
2. While touching the leftmost switch (
the monitor.
3. Select "Sharpness Recovery" in "Administrator Settings", then select
4. Use
or
5. Select "Apply" and then
Attention
• After changing the setting, perform a visual check according to the medical standards /
guidelines.
or
after completing the setting.
.
or
after completing the setting.
to turn off the monitor.
to select either "On" or "Off" and then select
.
.
.
), touch
for more than two seconds to turn on
Adjusting the Screen | 2
.
.
.
.
13
Advertisement
Table of Contents
