Lock/Unlock Osd Menu; System Settings; Avoiding Image Sticking - Eizo SCD 19102 Instructions For Use Manual

Start-up

6.7 Lock/unlock OSD menu

6.7 Lock/unlock OSD menu
CAUTION
Only authorized service personnel may lock or unlock the OSD. The OSD has to be locked
if inappropriate operation by the user can impact the intended use of the monitor.
Lock
You can lock the OSD when it is inactive.
To lock, enter the following key combination without interruption:
• Press key "4" and then key "2" three times.
The OSD menu is locked.
Unlock
• Press key "4" once and then key "2" three times (if the OSD is not active).
The OSD menu is unlocked.
Delivery state
The OSD is unlocked.

6.8 System settings

Note
Optimum picture quality
To achieve optimum picture quality, the monitor must be operated with a graphics resolu-
tion of 1280 x 1024 pixels. The corresponding setting for the graphics card must be made
in the operating system.

6.8.1 Avoiding image sticking

Image sticking may occur with LCD monitors. Image sticking is an effect whereby a faint im-
age of the previous screen contents can be seen after the display contents have changed.
The following measures can reduce or prevent image sticking:
• Use a screen saver with regularly changing images
• Switch off the monitor when it is no longer needed.
• The monitor has an energy saving mode:
If the application in use supports the energy saving mode, activate it.
48
SCD 19102
Instructions for Use, 06/2022