Dormakaba SVI 5 Series Commissioning Instructions

EN
SVI 5xxx
Commissioning instructions
1

Information about this document

1.1 Contents and purpose
This document supplements the SVA/SVI locks'
assembly instructions and contains technical
information for the mounting and commissioning of a
SVI 5xxx lock.
1.2 Target group
The locks may only be mounted by technical
specialists who have been trained for this purpose by
dormakaba.
1.3 Other applicable documents
• SVA/SVI locks assembly instructions
• SVA lock commissioning instructions
• Assembly instructions for the fittings used, e.g. door
handles, panic bar or knob.
1.4 Abbreviations
Active, self-locking
SVA (anti-)panic lock for the active
door leaf in 2-leaf door units
Inactive, self-locking (anti-)panic
SVI lock for the passive door leaf in
2-leaf door units
All versions of a lock; the exact
5xxx lock type is marked with 3 digits
instead of zeros.
2

Safety

2.1 Intended use
The SVI-5xxx is a lock for the passive door leaf for
2-leaf door units. The door unit's active door leaf
must be equipped with a dormakaba SVA lock.
• Only use components approved by dormakaba for
Mounting.
• Only mount combinations of lock and fitting that
have been tested and approved in accordance with
EN 179 or EN 1125. The list of approved components
can be found in the constancy of performance
certificate at www.dormakaba.com. Other
combinations on request.
• Mounting on fire and smoke protection doors
is only permitted if the usability certificates for
these doors provide for this mounting and if the
requirements are followed.
• The SVI 5xxx is suitable for use on fire and smoke
protection doors.
060658-45532/16387 – 05/2023
2.2 Non-intended use
• The lock may not be opened by third parties. If
the lock is opened by a third party, there is a risk
that safety-relevant functions (e.g. escape/panic
functions) will no longer exist.
• The identification plate on the lock contains
important information required by law and must
not be damaged or obscured.
2.3 Reasonably foreseeable misuse
• Do not combine with SVP locks.
• There may be no other locking devices on the door
unit.
• Do not make any changes to the door unit that are
not described in this manual.
• If door seals (e.g. profile seals, floor seals) are used,
they must not impede the intended function.
3

Product description

The SVI 5xxx is a mechanical lock for the passive door
leaf. The SVI 5xxx serves as a strike box for an SVA
lock. The lock locks automatically. As soon as the
passive door leaf is closed, the espagnolette bolts
extend. In case of emergency, the door can be opened
in the escape direction at any time.
3.1 Parts included
• SVI lock
• Forend (pre-mounted if necessary)
• Screws required for mounting
• Commissioning instructions SVI 5xxx
3.2 Variants
Variants for rebated solid doors
Forend: 235 x 20 mm with angled striking plate 12 mm
Rear backset: 33 mm
• SVI 5071: Backset 65 mm, DIN left
• SVI 5072: Backset 65 mm, DIN right
• SVI 5081: Backset 80 mm, DIN left
• SVI 5082: Backset 80 mm, DIN right
• SVI 5091: Backset 100 mm, DIN left
• SVI 5092: Backset 100 mm, DIN right
Variants for solid butt doors
Forend: 235 x 24 with lipped or flat strike plate
Rear backset: 33 mm
• SVI 5077: Backset 65 mm, DIN left/right
• SVI 5087: Backset 80 mm, DIN left/right
• SVI 5097: Backset 100 mm, DIN left/right
Variants for tubular frame doors
Forend: 310 x 24 with lipped or flat strike plate
Rear backset: 15 mm
• SVI 5119: Backset 35 mm, DIN left/right
• SVI 5129: Backset 40 mm, DIN left/right
• SVI 5139: Backset 45 mm, DIN left/right
1