CHIEF MFC Series Installation Instructions Manual page 11

Installation Instructions
Removing Display from Cart
1. Remove bolt or padlock from faceplate (if used).
(See Figure 15)
The pin may have been used as a more permanent
NOTE:
locking device. If so, remove nut and pin and move
from the lower holes to the upper holes.
2. Pull back on flag on upper mounting hole and press pin
down into "Open" position. (See Figure 15)
EACH DISPLAY MAY WEIGH IN EXCESS OF
WARNING:
40 LBS! Always use two people and proper lifting techniques
when installing or positioning display on cart.
3. Carefully lift display from cart.
4. Lift up on pin and place flag back against faceplate to return
it to "Closed" position. (See Figure 15)
Remove bolt
1
or padlock
if used
Pin in
"Closed"
position -
move to
"Open"
position to
remove
display
4
Pin in
"Open"
position -
move to
"Closed"
position
after display
is removed.
Figure 15
2
MFC Series
11