EZ-PD™ PAG2S-2P 65 W high-frequency active clamp flyback
charger and adapter solution user guide
Test setup
4
Test setup
Figure 6
shows the test setup to capture the electrical data of the DUT. The following is the optimal setup to
capture efficiency by capturing:
Input power using a power meter
•
Output power using high-resolution output multimeters
•
Figure 6
Test equipment connected to the standalone REF_65W_HFACF_PAG2 board
4.1
Test equipment
Table 3
shows the test equipment to measure performance parameters such as efficiency, ripple, regulation,
and transient response.
Table 3
Test equipment details
Test setup
Programmable AC source
AC power meter
PAT tester
Electronic load
Multimeters
User guide
Description
Chroma 61501
Yokogawa WT310E
USBCEE PAT
Chroma 63102A
Keysight 34465A
9
002-39511 Rev. **
2024-02-15