Power Adapter Tester (Pat) - Infineon EZ-PD PAG2S-2P User Manual

EZ-PD™ PAG2S-2P 65 W high-frequency active clamp flyback
charger and adapter solution user guide
Test setup
4.2

Power adapter tester (PAT)

Connect the DUT to a USB-C power adapter tester
established, the PAT UI does a PDO discovery and displays the results.
The EZ-PD™ PAG2S-2P based 65 W active clamp flyback charger and adapter solution is pre-configured with
seven PDOs:
Fixed PDOs: 5.0 V / 3.0 A; 9.0 V / 3.0 A; 15.0 V / 3.0 A; 20.0 V / 3.25 A
•
PPS: 5 V to 11 V, 3.0 A; 5 V to 15.0 V, 3.0 A; 5 V to 21.0 V, 3.25 A (PPS power limited)
•
Choose a suitable pre-configured PDO or configure a new one using the
the following sections use pre-configured PDOs.
To know more about the PAT tester, see USBCEE.
Figure 7 PAT tester and user interface
User guide
(PAT) using a USB Type-C cable. After the connection is
EZ-PD™ Configuration
10
Utility. Tests in
002-39511 Rev. **
2024-02-15