Table of Contents
Advertisement
EZ-PD™ PAG2S-2P 65 W high-frequency active clamp flyback
charger and adapter solution user guide
Board overview
3
Board overview
The EZ-PD™ PAG2S-2P based 65 W active clamp flyback USB PD charger and adapter solution
(REF_65W_HFACF_PAG2) shown in
Table
2.
Figure 2
REF_65W_HFACF_PAG2 solution board
In this solution, the EZ-PD™ PAG2x operates with an optimal frequency of 150 kHz and functions as a
secondary-side flyback, ACF controller, and SR controller. Additionally, a high-side driver is used externally to
drive the ACF/high-side GaN FET. This solution board consists of three boards:
Baseboard being primary board with EZ-PD™ PAG2P and other power components
•
EMI Board with filters and bulk capacitors
•
Secondary board with EZ-PD™ PAG2S, SR MOSFET, and Type-C connector
•
Figure 3
shows the schematic of EZ-PD™ PAG2S-2P based 65 W high frequency active clamp flyback charger and
adapter solution.
User guide
Figure 2
solution board is designed to meet the specifications shown in
6
002-39511 Rev. **
2024-02-15
Advertisement
Table of Contents
