Chapter 7 Installation And Uninstallation - Mitsubishi Electric MELSEC iQ-R Series User Manual

7
INSTALLATION AND UNINSTALLATION
This chapter shows the methods for installing and uninstalling each piece of execution software of MX MESInterface-R.
For the software that can be installed, refer to the following:
Page 72 Software configuration of MX MESInterface-R
Considerations for installation and uninstallation
• Log on to a personal computer as a user with an administrator authority.
• Before the installation, end all running applications on the operating system.
If software is installed while other applications are running, the product may not run normally.
• Install the software after changing the setting to prevent starting the update program automatically.
The installer may not run normally if an update program for either operating system or software of other companies such as
Windows Update and Java
• After completing the installation, the computer may need to be restarted.
If the restart message appears, restart the computer before using it.
For installing MES Interface Function Configuration Tool
Use MX MESInterface-R with software version '1.10L' or later when using an RD81MES96N.
For installing DB Connection Service Setting Tool
• Use DB Connection Service Setting Tool with version 1.14Q or later to connect to a MELSEC iQ-R series MES interface
module.
The version can be checked by selecting [Help]  [Product information].
• If the following message appears, install DB Connection Service Setting Tool after executing 'SETUP.EXE' in the 'EnvMEL'
folder in the DVD included in MX MESInterface-R.
If the "Program Compatibility Assistant" screen appears after completing the installation, select "This program installed
correctly".

update starts automatically.
7 INSTALLATION AND UNINSTALLATION
7
83