Mitsubishi Electric MELSEC iQ-R Series User Manual page 70

5.
Add an MES interface module.
Select "Information Module" for "Module Type" and "RD81MES96N" or "RD81MES96" for "Module Name" in the "Add
New Module" screen.
Item
Module Type
Module Name
Mounting Slot No.
Start I/O No. Specification
Start I/O No.
6.
Set whether to use module labels and sample comments, and click the [OK] button.
7.
Set the module parameters of the MES interface module.
[Navigation window]  [Parameter]  [Module Information]  target module
8.
After setting the parameters, write the setting to a CPU module from an engineering tool.
9.
Reset the CPU module or turn the power OFF and ON to apply the setting.
4 PROCEDURE BEFORE OPERATION
68
4.2 Starting an MES Interface Module and Configuration Personal Computer
Description
Select "Information Module."
Select "RD81MES96N" or "RD81MES96."
Select the slot number where an MES interface module is mounted.
Select "Not Set" when not specifying the start I/O number of an MES interface module; otherwise, select "Set."
When selecting "Set" for "Start I/O No. Specification," enter the start I/O number of an MES interface module.