Table of Contents
Advertisement
CAUTION
● Do not perform wiring close to a power line in order to avoid electrical noise (external
noise).
● Seal the wiring draw-in port securely with putty (field supply) to prevent the entry of
insects or the like.
3-5 Fixing procedure of the lower case.
In the case of wiring a remote controller through the top center outlet or rear outlet, perform the
wiring through the outlet hole in the lower case before it is installed on the wall.
3-5-1 Wall mounting
Secure by using the attached wood screws (2×).
3-5-2 Switchbox mounting
Secure by using the attached small screws (2×).
Switchbox
(field supply)
(Use optional accessory
KJB211A)
BRC1E53
–
4P419250-1
2015.10
Wood screws
(Ø4.0x30)
Small screws (M4×16)
Remote controller installation procedure
Switchbox for two units
(with no cover)
84
46
(Installation pitch)
Installer reference guide
8
Advertisement
Table of Contents
