Daikin BRC1E53 Installer's Reference Manual page 34

Prohibit Mode
16-5
Select "Fan", "Cool", "Heat", "Auto",
"Dry" or "VentClean" by using the
(Left/Right) buttons and "Enable/
Disable" the selected mode by using
the (Up/ Down) buttons.
16-6
Press the Menu/Enter button.
The confirmation screen is displayed.
16-7
Select Yes and press the Menu/
Enter button. The settings are
confirmed and the Basic screen
returns.
NOTE
● When the currently active mode is locked, this mode will still be active upon returning to the
Basic screen. Only when the mode is changed, the disabled mode will not be available
anymore. When all modes are locked, it is not possible to change to another mode other than
the currently active mode.
● If you want to restrict the number of operable modes on the sub remote controller, start with
only connecting this controller to the unit. Make sure that this controller is set to "main" (factory
default) first, change the restrictions to the setting you prefer and only then set the remote
controller to "sub".
Installer reference guide
33
16-5
Prohibit Mode
16-6 Fan :Enable
Cool :Enable
Heat :Enable
Auto :Enable
Dry :Enable
VentClean
:Enable
Return Setting
16-7
Prohibit Mode
Save the settings?
Yes No
Return Setting
<Basic screen>
Press the Menu/Enter
button.
Press the Menu/Enter
button.
BRC1E53
4P419250-1 – 2015.10