PC PLUS CentriPro Automatic Pump Controller Installation, Operation and Maintenance Manual CONGRATULATIONS! You are now a proud owner of a quality CentriPro product. For best results, please read this Installation, Operation and Maintenance (IOM) carefully before installing and using this product. TABLE OF CONTENTS Specifications ..................
SAFETY PRECAUTIONS This symbol together with one of the following words “Danger” or “Warning” indicates the risk level deriving from failure to observe the prescribed safety precautions: DANGER: Warns that failure to observe the precautions involves a risk of damage to persons and / or things. DANGER: Risk of electrical shock.
INSTALLATION INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS If the column of water between the If the column of water between the pump and the highest tap exceeds 15m If the column of water between the (static discharge head of 15m), the unit pump and the highest tap exceeds 15m pump and the highest tap exceeds 15m INSTALLATION INSTRUCTIONS...
L1-1X220/240V BROWN WIRING DIAGRAM BLUE WIRING DIAGRAM Wiring diagram f or connection GREEN YELLOW L1-1X220/240V of single phase 220/240V GREEN YELLOW Wiring diagram f or connection pumps up to 1.1 kW. of single phase 220/240V BLUE BROWN for MP and up to 1.5 kW for PC. for MP and up to 1.5 kW for PC.
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Secure the pump on a flat even surface. Secure the pump on a flat even surface. Screw the barrel union provided into the discharge port of the pump. Screw the barrel union provided into the discharge port of the pump. Place the O Ring into the recess of the barrel union discharge.
ELECTRICAL CONNECTION AND STARTING ELECTRICAL CONNECTION AND STARTING Failure to comply may cause unit and/or pump failure Failure to comply may cause unit and/or pump failure WARNING WARNING Never take the electronic board out of the control box. Never take the electronic board out of the control box. The wiring diagram inside the terminal block indicates how The wiring diagram inside the terminal block indicates how to make the correct connection.
INSTALLATION AND STARTUP STARTING STARTING The device can be installed directly on the pump or between the pump and the first tap. Make all the electrical connections, check that the pump is correctly primed, open a tap and When the unit is connected to the electrical supply, the green led “Power On” When the unit is connected to the electrical supply, the green led “Power On”...
TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION - - C C l l o o s s e e d d T T a a p p . . PROBLEM POSSIBLE CAUSE SOLUTION The pump The electronic card is broken - - T T h h e e c c o o l l u u m m n n o o f f w w a a t t e e r r o o v v e e r r t t h h e e...
No obligations other than those herein set forth shall be binding upon the company. AS4020 Certified Suitable for Compliant Drinking Water CentriPro is a trademark of Xylem Inc. or one of its subsidiaries. AU ED 03/2021 (Australian Edition)