1.1
Introduction
The AIMB-592 motherboard utilizes the AMD EPYC 7003 Zen 3 Core processor,
catering to industrial applications that necessitate high-performance computing and
advanced power management capabilities. It supports the AMD EPYC 7003 Zen 3
Core, boasting a sizable 256MB L3 cache and DDR4 3200 MHz with a maximum
capacity of 768GB (6 x 128GB per slot). The motherboard offers extensive I/O con-
nectivity, including 4 x PCIex16 slots, up to 2 x 10GbE LAN, 2 x 2.5GbE LAN, 5 x
USB 3.2 Gen2, 8 x SATA III ports, and IPMI2.0.
1.2
Features
Rich I/O connectivity: up to dual 10GbE LAN and dual 2.5 Gbe LAN via PCIe
x1 bus, 4 x PCIe x16 slot (Gen 4), 5 USB 3.2 Gen1, 2 slimline via PCIex4 bus.
Standard Micro ATX form factor with industrial features: The AIMB-592 is a
full featured Micro ATX motherboard with balanced expandability and perfor-
mance.
Diverse Storage Devices: SATA HDD, M.2 M-key SSD
Optimized Integrated Graphics: no integrated graphic.
1.3
Specifications
1.3.1
Processor
CPU: AMD EPYC™ 7003 Series Processors
BIOS: AMI EFI 256 Mb SPI (with Lotus SPI socket)
SATA hard disk drive interface: On-board SATA connectors with data trans- mis-
sion rate up to 600 MB
1.3.2
Memory
RAM: Up to 768 GB in six slots, 288-pin DIMM sockets. Supports dual-channel
up to DDR4 3200MHz RDIMM.
–
The ECC compatibility of AIMB-592 is supported.
1.3.3
Input/Output
PCIe slot: 4 PCIe x16 expansion slot
Serial port: a serial port of RS-232
USB port: Supports up to 5 USB 3.2 Gen1 ports with transmission rates up to
5Gbps.
GPIO: AIMB-592 supports 8-bit GPIO from super I/O for general-purpose con
troll application.
1.3.4
Graphics
Controller: ASPEED AST2500/AST2510 BMC Chip
VGA: VGA up to 1920x1200@60Hz
1.3.5
Ethernet LAN
Supports up to two 10/100/1000/2500 Mbps Ethernet port (s) via PCI Express
x1 bus and two 100/1000/10000 Mbps Ethernet port (s) via PCI Express x4 bus
Controller: LAN1/LAN2: Intel I226LM(AIMB-592SF/AIMB-592SL)LAN3/LAN4:
Intel X550-AT (AIMB-592SF); LAN5: Realtek 8211FSI(AIMB-592SF)
AIMB-592 User Manual
2