VERDER VERDERAIR HC-PURE SB Series Manual page 6

21-VA-MA_Manual_HC-PURE SB_rev1-en.indd 6 21-VA-MA_Manual_HC-PURE SB_rev1-en.indd 6
WARNING
PLASTIC PARTS CLEANING SOLVENT HAZARD
Use only compatible water-based solvents to clean plastic structural or pressure-containing
parts. Many solvents can degrade plastic parts and cause them to fail, which could cause
serious injury or property damage. See Technical Data in this and all other equipment
instruction manuals. Read fluid and solvent manufacturer's warnings.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
Read MSDS's to know the specific hazards of the fluids you are using.
Route exhaust away from work area. If diaphragm ruptures,
fluid may be exhausted with air.
Store hazardous fluid in approved containers, and dispose of it according
to applicable guidelines.
Always wear impervious gloves when cleaning equipment.
BURN HAZARD
Equipment surfaces and fluid that's heated can become very hot during operation. To avoid
severe burns:
Do not touch hot fluid or equipment.
Wait until equipment/fluid has cooled completely.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing,
or when in the operating area of the equipment to help protect you from serious injury,
including eye injury, inhalation of toxic fumes, burns, and hearing loss.
This equipment includes but is not limited to:
Protective eyewear, gloves, and hearing protection
Protective clothing
21-VA-MA_Manual_HC-PURE SB_rev1-en | 23.06.2023 6
23-06-2023 10:13 23-06-2023 10:13