STIEBEL ELTRON HOT 2.6 N 1600 Premium Operation And Installation Instructions Manual

STIEBEL ELTRON HOT 2.6 N 1600 Premium Operation And Installation Instructions Manual

Under sink water boiler

Advertisement

Quick Links

OPERATION AND INSTALLATION INSTRUCTIONS
UNDER SINK WATER BOILER
» HOT 2.6 N 1600 Premium

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOT 2.6 N 1600 Premium and is the answer not in the manual?

Questions and answers

Summary of Contents for STIEBEL ELTRON HOT 2.6 N 1600 Premium

  • Page 1 OPERATION AND INSTALLATION INSTRUCTIONS UNDER SINK WATER BOILER » HOT 2.6 N 1600 Premium...
  • Page 2: Table Of Contents

    Replacing the power cable ����������������������������������� 13 Specification ������������������������������������������������ 13 16.1 Dimensions and connections ��������������������������������� 13 16.2 Country-specific approvals and certifications ������������� 13 16.3 Extreme operating and fault conditions ������������������� 13 16.4 Data table �������������������������������������������������������� 14 | HOT 2.6 N 1600 Premium www.stiebel-eltron.com...
  • Page 3: General Information

    CAUTION Failure to observe this information may result in non-seri- Stiebel Eltron recommends the use of an external filter ous or minor injury. system in the HOT 2.6 N 1600 Premium cold water supply. www.stiebel-eltron.com HOT 2.6 N 1600 Premium|...
  • Page 4: Proper Use

    This change results more often than not from longer standing times. The HOT 2.6 N 1600 Premium Hot water faucets can be used to draw hot water from the appli- has a high grade stainless steel (1.4404 | 316L) tank that is fully...
  • Page 5: Operating The Appliance

    Boiling point detection blinking quickly (1 sec) Green LED lit Boiling point detection successful Both LEDs blinking Fault. Note the text on the display. quickly (1 sec) Both LEDs blinking Filter replacement required. slowly (2 sec) www.stiebel-eltron.com HOT 2.6 N 1600 Premium|...
  • Page 6: Settings

    5.2.4 Enable/disable filter meter button. You can now use the „+“ and „-“ buttons to bring up The HOT 2.6 N 1600 Premium appliance must be operated with a the menu items: water filter when water hardness values are greater than or equal f If you wish to change one of the menu items, bring up the to 11 °e (1.5°mmol/l).
  • Page 7: Configuration Menu

    Settings Configuration menu Pro1 | Pro2 HOT 2.6 N 1600 Premium has 3 time programs: Pro1, Pro2, and You can display the actual values, program the time programs for Pro3. Pro1 and Pro2 are preprogrammed at the factory, but you timer mode, and set other parameters in the configuration menu.
  • Page 8: Cleaning, Care, And Maintenance

    OPERATION Cleaning, care, and maintenance 5.4.6 Setting the filter capacity Note The HOT 2.6 N 1600 Premium appliance should be operated with The following applies for all time programs (Pro1, Pro2, a water filter. Pro3): - If the end time is earlier than the start time, the end The appliance is equipped with a built-in filter meter that deter- time is automatically applied to the next weekday.
  • Page 9: Troubleshooting

    Stiebel Eltron recommends the use of an external filter The faucet keeps running There is air in the in- Vent the filter cartridge. system in the HOT 2.6 N 1600 Premium cold water supply. for more than 2 seconds stalled accessory water See also the operating after hot water has been filter.
  • Page 10: Appliance Description

    The appliance may only be installed and used with an open Property damage (non-pressurized) faucet from Stiebel Eltron. If you use fittings The appliance is designed only for under sink installation. other than these, it will void the appliance warranty.
  • Page 11: Water Connection

    11.3 Connecting to a water filter an appropriate plug. The HOT 2.6 N 1600 Premium appliance should be operated with a water filter. For the water filter to work properly, it should be installed between the wall connection and the faucet.
  • Page 12: Commissioning

    E007 Waiting to cool to boil- Open the hot water valve until ing point detection the water coming out is cold. Close the valve and wait for suc- cessful boiling point detection. | HOT 2.6 N 1600 Premium www.stiebel-eltron.com...
  • Page 13: Maintenance

    15.2 Clean the strainer 101 (3.98“) 61 (2.4“) 61 (2.4“) (3.54“) 200 (7.87“) 1 Disconnect the push-fit connector HOT 2.6 N 1600 Premium Cold water supply Connectors Hot water outlet Nozzle Wall mount 16.2 Country-specific approvals and certifications See the type plate for certifications.
  • Page 14: Data Table

    Who gives the warranty N3 c N4 b 203882 203883 The warranty is given by Stiebel Eltron (Aust) Pty Ltd Electrical details (A.B.N. 82 066 271 083) of 294 Salmon Street, Port Mel- Rated voltage bourne, Victoria, 3207 (“we”, “us” or “our”). Rated output...
  • Page 15 The Stiebel Eltron warranty for the unit is in addition to any pool; rights and remedies you may have under the Australian g) connection to an incorrect power supply;...
  • Page 16 Hungary South Africa STIEBEL ELTRON Australia Pty. Ltd. STIEBEL ELTRON Kft. STIEBEL ELTRON Southern Africa (PT Y) Ltd 294 Salmon Street | Port Melbourne VIC 3207 Gyár u. 2 | 2040 Budaörs 30 Archimedes Road Tel. 03 9645-1833 | Fax 03 9644-5091 Tel.

Table of Contents