Download Print this page
STIEBEL ELTRON Hydro Shark SH-07 KW Installation Manual And Owner's Manual
STIEBEL ELTRON Hydro Shark SH-07 KW Installation Manual And Owner's Manual

STIEBEL ELTRON Hydro Shark SH-07 KW Installation Manual And Owner's Manual

Electric boiler (07-36 kw)

Advertisement

Quick Links

Hydro Shark Electric Boiler (07-36 KW)
Installation Manual and Owner's Guide
Hydro Shark
The
technology, impressive energy-saving performance,
and a compact design. Exclusively manufactured by
Stiebel Eltron, a leader in heating technologies for the
past 80 years.
Efficiency: 100 %
Wall Hung
Flow Activated: .5 GPM
Copper Heating Vessel
Temperature Range: 86°-140° F*
No Venting Required
Modulation Status LED
12-36 KW
UL 834
07-10 KW
UL 499
Electric Boiler features advanced
Featuring
STOP
Do not return to stores. Damages or
repairs call Hydro Smart at 763-331-3066
M-F 8 AM - 5 PM
Models:
SH-07 KW
SH-10 KW
SH-12 KW
SH-14 KW
SH-19 KW
SH-24 KW
SH-29 KW
SH-36 KW
For documents and support please visit:
www.hydro-smart.com
Sat. 8 AM - 12 PM
(Winter Only)

Advertisement

loading
Need help?

Need help?

Do you have a question about the Hydro Shark SH-07 KW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for STIEBEL ELTRON Hydro Shark SH-07 KW

  • Page 1 Hydro Shark Electric Boiler features advanced SH-07 KW technology, impressive energy-saving performance, SH-10 KW and a compact design. Exclusively manufactured by Stiebel Eltron, a leader in heating technologies for the SH-12 KW past 80 years. SH-14 KW SH-19 KW Featuring SH-24 KW •...
  • Page 2: Table Of Contents

    CONTENTS Installation Manual SPECIFICATIONS ....................... 4 INTRODUCTION ......................... 5 MOUNTING THE UNIT......................6 INSTALLATION........................7 Electrical Connections....................7 Fluid connections......................10 Technical Data........................ 10 Wiring Diagrams......................11 APPLICATIONS........................12 OWNER’S GUIDE TROUBLESHOOTING......................15 General......................
  • Page 3: Installation Manual

    Installation Manual CONGRATULATIONS Congratulations and thank you for choosing our micro boiler. Before use, we recommend that you read through this installation manual carefully. Keep this manual for future reference. If you need an additional manual, contact the manufacturer or your local distributor.
  • Page 4: Specifications

    SPECIFICATIONS HYDRO SHARK DBL POLE WATER MODEL VOLTS WIRE SIZE DRAW BREAKER TEMP (MAX) SIZE RANGE SH-07 (1) 40 24,573 SH-10 (1) 50 32,765 SH-12 (1) 70 40,956 SH-14 2 x 8 (2) 40 49,147 86° - 140° F SH-19 2 x 6 (2) 50 65,526...
  • Page 5: Introduction

    INTRODUCTION IMPORTANT! Read this entire manual. Failure to follow all the guides, instructions and rules could cause personal injury or property damage. Improper installation, adjustment, alteration, service and use of this unit can result in serious injury. This unit must be installed by a licensed electrician and plumber. The installation must comply with all national, state and local plumbing and electric codes.
  • Page 6: Mounting The Unit

    MOUNTING THE UNIT UNIT MUST BE INSTALLED IN A VERTICAL POSITION WITH THE WA- TER FITTINGS POINTING DOWNWARD. DO NOT INSTALL UNIT WHERE IT WOULD ROUTINELY BE SPLASHED WITH WATER OR ELECTRICAL SHOCK MAY RESULT. 1. Leave a minimum of 5” clearance on all sides for servicing. 2.
  • Page 7: Installation

    INSTALLATION ELECTRICAL CONNECTIONS WARNING: BEFORE BEGINNING ANY WORK ON THE ELECTRIC INSTAL- LATION, BE SURE THAT THE MAIN BREAKER PANEL SWITCHES ARE “OFF” TO AVOID ANY DANGER OF ELECTRIC SHOCK. ALL MOUNTING AND PLUMBING MUST BE COMPLETED BEFORE PROCEEDING WITH ELECTRICAL HOOK-UP.
  • Page 8 ELECTRICAL CONNECTIONS CONT’D SH-12 SH-14, SH-19, SH-24 CKT 2 CKT 1 CKT 1...
  • Page 9: Circuit Connection

    ELECTRICAL CONNECTIONS CONT’D SH-29, SH-36 CKT 1 CKT 2 CKT 3 CIRCUIT CONNECTION Please refer to specification table for wiring and circuit breaker size. See technical data section for wiring diagrams.
  • Page 10: Fluid Connections

    FLUID CONNECTIONS NOTE: EXCESSIVE HEAT FROM SOLDERING COPPER PIPES NEAR THE BOILER MAY CAUSE DAMAGE. 1. All plumbing work must comply with the national, state, local & any other applicable codes. 2. Make sure the radiant floor system has been purged & is free of floating debris. 3.
  • Page 11: Wiring Diagrams

    WIRING DIAGRAMS CKT 2 CKT 1 CKT 2 CKT 1 CKT 3 11/12 11/12 9/10 9/10 14 15 14 15 SH-24 SH-29 CKT 2 CKT 1 CKT 3 11/12 9/10 > 14 15 SH-36 Note: 1. Boilers are considered a continuous load. 2.
  • Page 12: Applications

    APPLICATIONS Space Heating Applications • In order to purge air in water pipes within a closed loop system, an air vent, air separator, and expansion tank should be installed in the system. (Hydro Smart pre-built space heating panels incorporate all of these features). •...
  • Page 13 Dual-purpose hot water heating (Domestic and Space Heating) Insert a Hydro Smart Combi Panel to provide potable heated water and Hydronic Heating (with space heating panel(s)) with one heat source. The Hydro Smart Combi Panel integrates with a wide variety of boilers and delivers “Priority” potable heated water with no storage tank and hydronic space heating in a small reliable package.
  • Page 14: Owner's Guide

    Owner’s Guide CONGRATULATIONS Congratulations and thank you for choosing our micro boiler. Before use, we recommend that you read through this owner’s guide carefully. Keep this manual for future reference. If you need an additional manual, contact the manufacturer or your local distributor.
  • Page 15: Troubleshooting

    TROUBLESHOOTING General Symptom Possible Cause Solution No Hot Water •No Power •Utility Controlling Load •Safety Thermal Cut Off Tripped •Reset Thermal Cut Off •Not Enough Flow Rate To Activate •Wrong Size Pump •Plugged Flow Sensor •Activate Thermostat/ Clean Flow Sensor Water Not Hot Enough •Water Flow Too High •Reduce Water Flow Rate...
  • Page 16: Components Diagram

    COMPONENTS DIAGRAM A- Fluid Temp.Controller F- Cold Fluid Return - 3/4” MPT B- High Limit Safety G- Electrical Circuit Knock-Outs C- Flow Meter H- Hot Fluid Supply - 3/4” MPT D- Wiring Terminal I- Hinged Cover on 12- 36 KW Units E- Control Board...
  • Page 17: Parts List

    PARTS LIST Part Number Description 286356 Housing, SH-12 thru SH-36 245307 Temperature Control Knob, SH-07 thru SH-36 279998 Wiring Block, SH-07- thru SH-12 279997 Wiring Block, SH-14- thru SH-24 279996 Wiring Block, SH-29- thru SH-36 286360 Heating System, SH-12 286361 Heating System, SH-14 286362 Heating System, SH-19...
  • Page 18: Pressure Drop Table

    Boiler Pressure Drops Table (Boilers SH-12 thru SH-36) This table is used for sizing Primary (Boiler) Circulator All boilers must use Primary/Secondary circuitry. This is used to create Hydraulic seperation between the Boiler and Emitter circulators allowing you to create 57.5 SH-29,36 34.5...
  • Page 27 NOTES:...