Table of Contents
Advertisement
OPERATING YOUR WINE COOLER
The controls of your wine cooler
POWER OFF/ON
To turn the appliance ON or OFF, touch the
SET
To set or view the internal temperature setting for each zone.
LIGHT
To control the interior light, turn on/off.
UP
Press to raise (warm) the set temperature by 1°C or 1°F.
DOWN
Press to lower (cool) the set temperature by 1°C or 1°F.
°F/°C Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to
Celsius or from Celsius to Fahrenheit, touch and hold
KEY LOCK
After 2 minutes of inactivity, the controls will be locked automatically. To release the lock, touch the UP
at the same time for 5 seconds.
TEMPERATURE ZONES
The wine cooler has two temperature zones with a temperature range of 40 -72°F. The recommended temperature
setting for each zone is:
•
Lower Zone
between 55-72°F (Ideal for red and white wines)
•
Upper Zone
between 40-55°F (Ideal for sparkling and white wines)
NOTE: The temperature set for the Lower Zone must always be the same or higher than the temperature set for the Upper Zone. For optimal
performance, the set temperature of the two zones should differ by at least 4°F. It is also normal for the temperature of the air inside the unit fluctuate
by plus/minus 7°F. If it fluctuates any more than 7°F, please contact customer service.
SETTING A TEMPERATURE
•
Touch SET
to set the internal temperature for each zone. The degrees indicators will appear in the display
window marked
10
0
and
for UPPER ZONE and
marks at the same time for 5 seconds.
mark for 5 seconds.
for LOWER ZONE.
and DOWN
Advertisement
Table of Contents
