Advertisement
Available languages
Available languages
Safety devices
Retractable blade guard
The retractable blade guard protects against unin-
tentional contact with the saw blade and from chips
flying about.
The retractable blade guard always has to close
automatically: If the sawhead is fully lifted, the teeth
of the saw blade must be fully covered.
Sawhead lock with release button
Inside the saw a sawhead lock is fitted. This lock
prevents the unintentional lowering of the sawhead
onto the saw table.
The sawhead lock must always engage when the
sawhead is fully lifted.
Fence
The fence keeps the workpiece from moving when
being cut.
· The fence must always be fitted when cutting.
· For cutting the workpiece must be held against
the fence and the saw table:
- with a support area as large as possible;
- without being under tension (or else the work-
piece will move upon completion of the cut or
the saw blade jams).
2.3
Operating controls
On/off switch
· To start motor:
- depress switch button.
· To stop motor:
- release switch button.
Sawhead tilt
The sawhead can be tilted steplessly from 90° verti-
cal to a 45° bevel.
KS 205
Advertisement
