Md Guide Messages - Aiwa XR-M99 Operating Instructions Manual

MD GUIDE MESSAGES
the unit was subjected to a strong shock during
recording, or during recording or reading of the
TOC.
Message Cause Solution
Blank Disc Nothing is recorded on the disc. —
Can't Edit Tracks are too short to be joined up. See "THE LIMITATIONS OF MD" on page 21.
The combine function was used while playing
back the first track.
The divide function is used at the beginning of the
track.
The combine function was used to join a track
recorded in monaural with a track recorded in
stereo.
Disc Error The disc is damaged by scratches. Replace the disc.
The unit received a strong shock during a TOC Do not subject the disc to strong shock during a
reading. TOC reading.
Disc Full There are not enough time to record remaining on Replace the disc with another recordable disc.
the disc.
Temp Over The temperature of the unit is too high. Leave the unit in a cool place for a while before
operating it again.
The surrounding temperature is too high or too Operate the unit at moderate room temperature.
low.
PB Disc A prerecorded disc is attempted to edit. Replace the disc with a recordable one.
Protected The disc is record-protected. Slide the record-protect tab on the disc. (See page
24.)
'TOC Full There are too many tracks or emphasis data to be Erase tracks. En
recorded or edited, or there is no room on the
disc.
Mecha Err Error occurred in the loading mechanism. Turn the power off and disconnect the AC cord
(All functions are disabled.) once. Then turn it on again.
If this message still appears, consult your local
Aiwa dealer.
MD Error An error occurred in the MD unit of this unit. Contact an Aiwa service representative.
UTOC Error An error occurred in the TOC of the MD because Exchange the MD.
Do not subject the unit to strong shocks during
recording, or during recording or reading of the
TOC.
ENGLISH 39