Al Edit Recording - Aiwa XR-M99 Operating Instructions Manual

Al EDIT RECORDING
MODE
0-9,4+10
FUNCTION
UP/DOWN FUNCTION
<< >>
|
@REC
<<< >>
The Al edit function enables CD recording without worrying about
tape length and track length. When a CD is inserted, the system
automatically calculates track lengths. If necessary, the order of
tracks is rearranged so that no track is cut short.
(Al: Artificial Intelligence)
Al edit recording will not start from a point halfway into the tape.
The tape must be recorded from the beginning of either side.
7 Insert the tape into the deck.
Insert the tape with the side to be recorded on first facing
upward.
2 Press the FUNCTION UP or DOWN button on the
Stereo Integrated Amplifier or the FUNCTION
button on the remote control repeatedly so that
"CD" appears. Then load the disc.
3 Press the MODE button on the remote control
repeatedly until "EDIT" lights up and "Al" flashes
on the display.
18 ENGLISH
4 Press the numbered buttons to designate the tape
length.
10 to 99 minutes can be specified.
Example: When using a 60-minute tape, press the 6 and 0
buttons.
In a few seconds, the microcomputer determines the tracks
to be recorded on each side of the tape.
* The << and PF buttons on the Compact Disc Player or
the remote control are also available to designate the tape
length.
Tape side A
Lh Tape length
Number of
Remaining time of side A
programmed
tracks
5 Press the @ REC button to start recording.
The tape is rewound to the beginning of the side facing upward,
the lead segment is played through for 10 seconds, and
recording starts. When recording on the side facing upward
(side A) ends, recording on the opposite side (side B) starts.
To stop recording
Press the ll button on the Stereo Cassette Deck or the remote
control. Recording and CD play stop simultaneously.
To clear the edit program
Press the I button on the Compact Disc Player or the remote
control twice so that "EDIT" disappears on the display.
To check the order of the programmed track numbers
Before recording, press the MODE button to select side A or B,
and press the ® button repeatedly.
Tape side Program number
il
|
Track number Programmed track
numbers
Time on cassette tapes and editing time
The actual cassette recording time is usually a little longer than
the specified recording time printed on the label. This unit can
program tracks to use the extra time.
« Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
* The Al edit function cannot be used with discs containing 31
tracks or more.