Programmed Edit Recording; Eco Mode; Setting The Clock - Aiwa NSX-SZ310 Operating Instructions Manual

Programmed Edit Recording
As you program the CD tracks to record, Programmed Edit
Recording displays the remaining recording time for each side
of the tape, so you can easily select a set of desired tracks
within the length of your tape.
17 Insert the recording tape in DECK 2.
2 Press CD to select the CD function and load the
disc.
Press SHIFT+CD EDIT/CHECK twice on the
remote control.
The "PRGM" and "EDIT" indicators light up and
"PAGMC-O0" appears on the display.
Press the numbered buttons on the remote
control to enter the length of the recording tape.
10 to 99 minutes can be specified.
© <<, > oF MULTI JOG can also be used to specify
tape length.
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press the numbered buttons on the remote
control to select the first track to be recorded on
side A.
-To select the 25th track, press +10, +10 and 5.
-To select the 10th track, press +10 and 0.
Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed. You
cannot select a track with a longer playing time.
7 Press SHIFT+CD EDIT/CHECK on the remote
control to switch to side B and select the tracks
for the side.
8 Press SHIFT+CD EDIT/CHECK on the remote
control to switch back to side A and press @REC/
REC MUTE to start recording on side A.
The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.
Press SHIFT+CD EDIT/CHECK on the remote
control to switch to side B, turn over the tape,
and press @REC/REC MUTE to start recording
on side B.
eYou cannot program more than 30 tracks. "FULL" is
displayed.
You cannot program a track with a track number larger than
30.
¢ Recording cannot start from a point halfway in the tape.
To stop recording
Press Ill. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, press SHIFT+CD EDIT/CHECK on the
remote control to select side A or B.
2 Press <¢<@ or BP repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Press SHIFT+ CD EDIT/CHECK on the remote contro! to select
side A or B, and press Mi CLEAR to clear the program for the
selected side. Then, select tracks again.
To clear the edit program
Press MI CLEAR twice so that "EDIT" disappears from the
display.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.
; Tab for side A
16
. . ¢
ECO mode Dimmer Setting the clock
Reduces power consumption with the following operations, etc. Adjusts the brightness of the display. 1 Press SHIFT+CLOCK on the remote control.
ECO ON mode 1 Press DEMO/ECO twice when the unit is turned 2 Press <4 or ®P ito set the time.
- The unit blacks out when the unit is turned off. Only the red on, and then within 4 seconds press ENTER. Each press changes the time in 1-minute steps. Holding
indicator lights up. (Only when the clock is set.) ' it down changes the time in 10-minute steps.
- If dimmer mode is set to on, the unit illumination brightens 2 Ee aaelias asthe the ena If <4 of bP is not pressed within 4 seconds, setting
(for 10 seconds) only when you operate the unit. tie TEE : the bri ht a d OIANEE 3" th is cancelled.
- When the unitturns on with the timer recording, the dimmer ainimneek rae ee Sule © MULTI JOG is also available in place of <@< or >>.
6 pads SORT MME NOLIN $6520 ANON If there is no MULTI JOG or button operation within 4 3 Press ENTER or BESET.
- In addition to the operations of ECO ON mode, the unit seconds, setting is cancelled. i. time oo stops flashing and the clock starts from
automatically turns itself off if you do not operate the unit Tp cancel the dimmer SECONES,
and the sound source is mute for 10 minutes. Repeat the above and select "DIM-OFF". To display the time
1
2
Press DEMO/ECO once when the unit is turned
on, and then within 4 seconds press ENTER.
Turn MULTI JOG to select one of the ECO modes
and then press ENTER.
If there is no MULTI JOG or button operation within 4
seconds, the setting is cancelled.
To cancel the ECO mode
Repeat the above and select "ECO OFF".
Press SHIFT+CLOCK on the remote control.
The time will be displayed for 4 seconds, but it cannot be
displayed during recording.
To switch to the 24-hour standard
Display the time and press Il within 4 seconds.
With each press, the clock alternates between the 12-hour
standard and the 24-hour standard.
Tip:
In the 12-hour standard, "AM 12:00" indicates midnight
and "PM 12:00" noon.
If the clock display flashes when the unit is tuned
off
There has been a power interruption. Re-set the clock.