Aiwa XR-M99 Operating Instructions Manual page 23

To change the display in stop mode
Press the DISPLAY button. With each press of the button, the
display changes in the following order.
@ Total number of tracks and total playing time of the MD
(Example: MD 10Tr 58:31)
@) Disc title
(If the disc title is not registered, "No Title" is displayed.)
@ Remaining recordable time of MD
(Example: Rem —48:07)
The remaining recordable time of MD changes automatically to
the total number of tracks and total playing time after 4 seconds.
To change the display in playback mode
Press the DISPLAY button. With each press of the button, the
display changes in the following order.
@ Level indicator
@) Track number being played and elapsed playing time
(Example: MD 3Tr 3:43)
@) Track title
(If the track title is not registered, the track number is
displayed.)
@ Remaining time of playback
(Example: MD —26:15)
* Nothing other than an MD should be inserted in the disc drive,
otherwise the disc may become scratched, causing a
malfunction or a safety hazard such as an electric shock.
* Do not attempt to insert another MD while a disc is already
inside the drive.
* Do not tilt the MD Deck with a disc inserted. Doing so may
cause malfunctions.
RANDOM/REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the disc can be played randomly.
Press the MODE button repeatedly until "RANDOM"
lights up on the display.
To cancel random play, press the MODE button repeatedly until
the normal display appears and "RANDOM?" disappears.
* Even if the <4 button is pressed, a previously played track
cannot be skipped. The unit returns to the beginning of the
current track only.
«When you select a track with the numbered buttons on the
remote control during the random play mode, the selected track
starts to play and the random play mode is canceled.
REPEAT play
A single track or all tracks can be played back repeatedly.
Press the REPEAT button repeatedly.
"G1" lights up when the single track repeat play is selected,
and "G." fights up when the all tracks repeat play is selected.
To cancel repeat play, press the REPEAT button repeatedly until
"G" and "1" disappear.
To repeat random play
First press the RANDOM button to activate random play.
Then press the REPEAT button so that "C»" lights up.
PROGRAMMED PLAY
Up to 30 tracks can be programmed from the inserted disc.
Use the remote control.
7 In stop mode, press the MODE button repeatedly
until "PRGM" appears on the display.
2 Press the numbered buttons and the +10 button
to program a track.
Example:
To select the 12th track, press the +10 and 2 buttons.
To select the 20th track, press the +10, +10 and 0 buttons.
Selected track number Program number
Total number of
selected tracks
Total playing time of
the selected tracks
3 Repeat step 2 to program other tracks.
4 Press the & button to start play.
To check the program
Each time the > button is pressed in stop mode, a track number
and program number will be displayed.
To clear the program
Press the ll button in stop mode.
To add tracks to the program
Before playing, repeat step 2. The track will be programmed after
the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
NOTE
* During the programmed play, the MODE and numbered buttons
do not function.
* Repeating programmed play is also possible.
+ If the programmed time exceeds 255 minutes 59 seconds, or
the disc track number 31 or above is programmed, the display
shows --:-- as the total playing time.
ENGLISH 23