Displays In The Operating Display - Sartorius WZB25-NC Operating Instructions Manual

Operation
8.7.4

Displays in the Operating Display

Symbol Designation
[Counting] display
[Percent weighing]
display
[Calculation] display
[Animal weighing]
display
[Net total] display
[Totalizing] display
[Density
determination]
display
[Busy] display
[Sign] display
[Zero] display
[AUTO] display
[R12] display
[Percent] display
[Net] display
[Gross] display
[Selection] display
[Unit symbol]
display
[Quantity] display
Display
[Invalid weight
value]
42 Weigh Cell Operating Instructions
Description
Indicates that the "Counting" application is selected.
Indicates that the "Percent weighing" application is selected.
Indicates that the "Calculation" application is selected.
Indicates that the "Animal weighing" application is selected.
Indicates that the "Net total" application is selected.
Indicates that the "Totalizing" application is selected.
Indicates that the "Density determination" application is selected.
Indicates that the device is processing a command.
Indicates whether the value being displayed is positive or negative.
For some conformity-assessed devices: Indicates that the device has been
zeroed.
Indicates that the "Animal weighing" application starts automatically.
Indicates the active range for multi-range balances.
Indicates that a percentage value is being displayed.
Indicates that a net value is being displayed.
Indicates that a gross value is being displayed.
— In the menu: Identifies the selected parameter.
— If the "Density determination" application is active: Indicates that a
calculated value is being displayed.
Indicates the set weight unit, e.g., [g] for "grams".
Indicates that a quantity is being displayed.
— Indicates that the display does not contain a weight value, but is instead the
calculated result of an application, e.g., for the "Animal weighing"
application.
— For conformity-assessed devices: Indicates a fault. The cause of this fault is
displayed after pressing the [Unit Toggle] key.