Table of Contents
Advertisement
Level 1
Level 2
Active setup
Balance
menu
* Only for NC models
O = Factory setting
Level 3
Weight unit
O
Accuracy
O
Cal./adjust. function
O
Adjustment process
O
Zero range
O
Zero at power on
O
Level 4
Available unit
g, grams
Units: Kilogram to Newton
All digits on
Last digit on/off during load change
Scale interval index +1
Scale interval index +2
Scale interval index +3
Last digit scale interval 1
Last digit off
10x resolution
Ext. adjustment with default weight
Ext. adjustment with user-defined weight
Internal adjustment*
Ext. linearization with default weights
Ext. linearization with user-defined weights
Set the preload
Delete the preload
Cal. key/command blocked
Selection list
Define internal weight (is blocked)
Adjust immediately
Calibration before adjustment
2% of max load
10% of max load
10% of max load
100% of max load
Weigh Cell Operating Instructions
System Settings
Codes
1. 1. 7. 1
1. 1. 7. 2
1. 1. 7. 3
up to
1. 1. 7. 23
1. 1. 8. 1
1. 1. 8. 2
1. 1. 8. 3
1. 1. 8. 4
1. 1. 8. 5
1. 1. 8. 6
1. 1. 8. 7
1. 1. 8. 14
1. 1. 9. 1.
1. 1. 9. 3.
1. 1. 9. 4.
1. 1. 9. 6.
1. 1. 9. 7.
1. 1. 9. 8.
1. 1. 9. 9.
1. 1. 9. 10.
2. 1. 9. 12
3. 1. 9. 18
1. 1. 10. 1.
1. 1. 10. 2.
1. 1. 11. 2.
1. 1. 11. 4.
1. 1. 12. 4.
1. 1. 12. 7.
23
Advertisement
Table of Contents
