Remote Control - PS Audio Stellar Gold Owner's Reference Manual

Your Stellar Gold Preamp comes
Remote
with a full-function remote control.
In addition to operating your
Stellar Gold Preamp, this remote
works with all Stellar products and
most functions will translate to the
PerfectWave line.
Remote Code Settings:
Your Stellar Gold Preamp comes
with a default code set. If your
remote is interfering with other
devices, you can switch to the
second code set.To do so, press
and hold the Light Bulb button
(bottom of the remote) and the
circular Off button (top center of
the remote) at the same time. If
the remote backlight flashes white
once, you are now on IR1. If it
flashes white twice, you are now on
IR2.
You will also need to update the
unit. See Firmware Update section
of this manual for instructions.
Button Guide:
•
•
•
•
PS Audio® Inc. 800-PSAUDIO 4865 Sterling Drive Boulder, Colorado 80301
Operating Guide
On: Takes the Preamp out of
Ready (Idle) mode and puts it in
Operational mode. In addition, it
undoes the Dim function.
Off: Puts the Preamp in Ready
(idle) mode.
Dim: Dims the logo button and
turns off the screen and control
navigation backlight. Press On
to undo it.
Analog Inputs: Lets you select
the desired input.
©2023 PS Audio Inc. All rights reserved.
Stellar Gold Preamplifier
Owner's Reference
12