PS Audio Stellar Gold Owner's Reference Manual page 2

Safety Instructions
PS Audio® Inc. 800-PSAUDIO 4865 Sterling Drive Boulder, Colorado 80301
Owner's Reference
Read these instructions
Heed all warnings
Follow all instructions
WARNING. TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
Clean only with a dry cloth. For the Piano Finish Top refer to the instructions on page 8 of the Quick Start Guide.
Do not place flammable material on top of or beneath the component.
All PS Audio components require adequate ventilation at all times during operation. Rack mounting is acceptable
where appropriate.
Do not remove or bypass the ground pin on the end of the AC cord. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for
long periods of time.
When making connections to this or any other component, make sure all components are off. Turn off all systems'
power before connecting the PS Audio component to any other component. Make sure all cable terminations are
of the highest quality.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY PS AUDIO PRODUCT. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.
Please contact your authorized dealer, distributor, or PS Audio if you have any questions not addressed in this
reference manual.
PS Audio ® is a registered trademark of PS Audio International Inc., and is restricted for use by PS Audio International,
Inc., its subsidiaries, and authorized agents.
Rev. A2
©2023 PS Audio Inc. All rights reserved.
Owner's Reference Stellar Gold Preamplifier