PS Audio Stellar Gold Owner's Reference Manual page 20

Audio
Sub-Menu
System
Sub-Menu
PS Audio® Inc. 800-PSAUDIO 4865 Sterling Drive Boulder, Colorado 80301
From the main menu, find Audio then press the menu button twice to enter the Audio sub-menu. Hit
the menu button once to scroll through the sub-menu options.
Input Names (Sub- • Hit the menu button twice to enter Input Names.
Menu) • Use volume knob to scroll through inputs and highlight the input you want
to change.
• Once the name is highlighted, hit the menu button once.
• Use the volume knob to scroll through the naming options.
• Once the name you want is highlighted, hit the menu button once to select
it.
• A pop up will appear and ask "Rename....?" Hit the menu button to select OK
or use the volume knob to highlight Cancel first if you change your mind.
Input Trim • Use the volume knob to highlight the input you would like to trim.
• Hit the menu button once to select it.
• Turn the volume knob right to add dBs and left to lower dBs.
DAC Input Use the volume knob to find the input
hit buttons relating to the DAC on your remote, the Preamp will automatically
switch to that input.
Phono Input Use the volume knob to find the input
hit buttons relating to the Phono on your remote, the Preamp will automatically
switch to that input.
RCA2 Fixed Use the volume knob to select a fixed volume (1-100) for RCA2. To disable this
Volume feature, scroll to 0 or off.
Max Volume Use the volume knob to select a max volume (1-100). If undesired, select 100 to
disable.
From the main menu, find System then press the menu button twice to enter the System sub-menu.
Hit the menu button once to scroll through the sub-menu options.
Backlight
Trigger Timeout
(delay output to other devices
for short period after StellarGold
Preamp activated)
IR Enable
Firmware Update (sub-menu)
©2023 PS Audio Inc. All rights reserved.
Reference
Owner's Reference
Audio Sub-Menu
your DAC is attached to. Now when you
your Phono is attached to. Now when you
System Sub-Menu
Use the volume knob to select a brightness setting for the display
and logo button. Options are 1-10, where 10 is the brightest.
Use the volume knob to select Off, 0s, 5s, 10s, 20s, 30s, 45s or 1
minute for trigger timeout. Select off to disable.
Use the volume knob to select Off (no remote works), IR1 (default)
or IR2 (if remote is interfering with other devices).
This is a multi-step process. Please see the Firmware Update
section of this manual for instructions.
Stellar Gold Preamplifier
16