Operating Guide
•
You can have as many files on the USB thumb drive as you want, but only the first five valid files for
the device are displayed.
•
The files must be named stellar_pre_v#.#.#.bin. For example, stellar_pre_v2.4.1.bin.
•
You can have other bin files for other products on this thumb drive (for example, stellar_dac_
v2.1.2.bin). Only files that start with "stellar_pre_" will be loaded by the Stellar Gold Preamp.
WARNING: In the past, you would update a unit by copying an "image.bin" file to the thumb drive. This
method still works to automatically update a unit after a reboot (you do not need to go through the
menus to use the image.bin file). The image.bin file takes precedence over the stellar_bin_xxx.bin files. It
is recommended to NOT have an image.bin file on the thumb drive if you are using the stellar_pre_xxx.
bin files and the System | FW Update method to update files.
Upgrading/ Downgrading
•
Plug the USB thumb drive into the unit in USB-A slot on the back panel marked FW.
•
Enter the menus and go to System | FW Update.
•
The files will display on the screen in alphabetical order.
•
Scroll up or down to highlight the file you want to load.
•
Press the
menu button
•
A progress screen will display. The update process will initialize and then a progress indicator in
percentage complete will display.
•
Once complete, the progress screen will indicate the unit is resetting.
•
The unit will reset. The Logo LED will blink rapidly as the unit is being programmed.
Notes
•
If you select the same version that is already loaded, the upgrade will be skipped and the Logo LED
will not blink. The unit will still reset.
•
If there is an error, the error will be displayed.
- If you have problems with loading firmware, you can contact PS Audio customer
support with the error you see.
- Press the
menu button
•
You can exit the FW Update screen using a long press of the menu button.
Factory Reset (sub-menu)
The Factory Reset sub-menu setting returns all menu items to their original factory settings.
Note : Any custom settings performed since the last Facory Reset, or first use, will be lost.
1. Double-click the menu button to start the reset process.
2. Turn the knob to select "Reset".
3. Press the menu button to begin.
After a few seconds, the preamplifier automatically restarts at the main menu with restored
factory settings.
PS Audio® Inc. 800-PSAUDIO 4865 Sterling Drive Boulder, Colorado 80301
to select the file.
to exit from the error screen
©2023 PS Audio Inc. All rights reserved.
Stellar Gold Preamplifier
Owner's Reference
11