PS Audio Stellar Gold Owner's Reference Manual page 14

Hide thumbs Also See for Stellar Gold:
Table of Contents

Advertisement

Operating Guide
Backlight
The Backlight sub-menu setting allows adjusting the brightness of both the Standby mode
switch (1) and the Display (4) to compliment the room lighting. Options range from 1–10 with 10
being brightest. Follow these steps to set the brightness:
1. Turn the knob to select the desired brightness level.
2. Press the button to select.
3. Double-click the menu button to return to the main settings menu.
Trigger Timeout
The Trigger Timeout sub-menu setting permits adding a delay to the trigger output signal to
adjust the time between placing the StellarGold Preamplifier in Operational mode and when a
power amplifier connected to the trigger output is signaled to power up. The delay can be set to
one of "Off", "0s", "5s", "10s", "20s", "30s", "45s" or "1m". Follow these steps to set the delay:
1. Turn the knob to select "Off" or the desired delay time.
2. Press the button to select.
3. Double-click the menu button to return to the main settings menu.
IR Enable
The IR Enable sub-menu setting can be used to prevent the remote control from interfering
with other remote-controlled components in your system. Turn the knob to select one of the
following:
• Off: disables the remote control function eliminating all interference.
• IR1: The default setting. Use this if no interference is experienced.
• IR2: Selects alternate code set. Use this if the Stellar remote affects other components.
When you change this setting, you also need to change it on the remote. To do so, press and
hold the Light Bulb button (bottom of the remote) and the circular Off button (top center of the
remote) at the same time. If the remote backlight flashes white once, you are now on IR1. If it
flashes white twice, you are now on IR2.
Firmware Update (sub-menu)
This feature allows you to select from multiple firmware loads on a USB thumb drive. It provides a faster
and easier method of upgrading and downgrading new firmware for A/B style testing.
Preparing the USB thumb drive
PS Audio® Inc. 800-PSAUDIO 4865 Sterling Drive Boulder, Colorado 80301
©2023 PS Audio Inc. All rights reserved.
Stellar Gold Preamplifier
Owner's Reference
10

Advertisement

Table of Contents
loading

Table of Contents