Before Using Your New Induction Hob; Technical Specification; Operation Of Product; Touch Controls - Candy CIKC30 Instruction Manual

2.4

Before using your New Induction Hob

•
Read this guide, taking special note of the 'Safety Warnings' section.
•
Remove any protective film that may still be on your Induction hob.
2.5

Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
3.

Operation of Product

3.1

Touch Controls

•
The controls respond to touch, so you don't need to apply any pressure.
•
Use the ball of your finger, not its tip.
•
You will hear a beep each time a touch is registered.
•
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering them.
Even a thin film of water may make the controls difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
CIKC30
2 Zones
220-240V~ 50Hz or 60Hz
3500W
288X520X59.5
268X500
8