Advertisement
Safety Instructions
Danger :
Danger
if not avoided, will result in death or serious injury.
Warning:
Warning
if not avoided, could result in death or serious injury.
Caution
Caution:
if not avoided, could result in minor or moderate injury.
1. The compatibility of the product is the responsibility of the
person who designs the equipment or decides its
specifications.
Since the product specified here is used under various operating conditions,
its compatibility with specific equipment must be decided by the person who
designs the equipment or decides its specifications based on necessary
analysis and test results. The expected performance and safety assurance
of the equipment will be the responsibility of the person who has determined
its compatibility with the product. This person should also continuously
review all specifications of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of
equipment failure when configuring the equipment.
2. Only personnel with appropriate training should operate
machinery and equipment.
The product specified here may become unsafe if handled incorrectly. The
assembly, operation and maintenance of machines or equipment including
our products must be performed by an operator who is appropriately trained
and experienced.
3. Do not service or attempt to remove product and machinery/
equipment until safety is confirmed.
1. The inspection and maintenance of machinery/equipment should only be
performed after measures to prevent falling or runaway of the driven
objects have been confirmed.
2. When the product is to be removed, confirm that the safety measures as
mentioned above are implemented and the power from any appropriate
source is cut, and read and understand the specific product precautions
of all relevant products carefully.
3. Before machinery/equipment is restarted, take measures to prevent
unexpected operation and malfunction.
4. Our products cannot be used beyond their specifications.
Our products are not developed, designed, and manufactured
to be used under the following conditions or environments.
Use under such conditions or environments is not covered.
1. Conditions and environments outside of the given specifications, or use
outdoors or in a place exposed to direct sunlight.
2. Use for nuclear power, railways, aviation, space equipment, ships,
vehicles, military application, equipment affecting human life, body, and
property, fuel equipment, entertainment equipment, emergency shut-off
circuits, press clutches, brake circuits, safety equipment, etc., and use for
applications that do not conform to standard specifications such as
catalogs and operation manuals.
3. Use for interlock circuits, except for use with double interlock such as
installing a mechanical protection function in case of failure. Please
periodically inspect the product to confirm that the product is operating
properly.
∗ A non plug-in type individual wiring manifold has been added.
Edition B
∗ An EX510 serial wiring compatible type has been added.
∗ A PC wiring compatible type has been added.
∗ A regulator block and an intermediate connector block have been added as options.
∗ The SJ3A6 series vacuum release valve with restrictor has been added.
∗ Number of pages has been increased from 48 to 96.
∗ A plug-in cable type manifold has been added.
Edition C
∗ A SUP/EXH block with regulator and pressure switch, and a valve with
speed controller have been added as options.
Safety Instructions
Akihabara UDX 15F,
4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPAN
Phone: 03-5207-8249 Fax: 03-5298-5362
https://www.smcworld.com
© 2023 SMC Corporation All Rights Reserved
Specifications are subject to change without prior notice
and any obligation on the part of the manufacturer.
These safety instructions are intended to prevent hazardous situations and/or
equipment damage. These instructions indicate the level of potential hazard with
the labels of "Caution," "Warning" or "Danger." They are all important notes for
safety and must be followed in addition to International Standards (ISO/IEC)
and other safety regulations.
indicates a hazard with a high level of risk which,
indicates a hazard with a medium level of risk which,
indicates a hazard with a low level of risk which,
Warning
Be sure to read the "Handling Precautions for SMC Products" (M-E03-3) and "Operation Manual" before use.
∗1) ISO 4414: Pneumatic fluid power - General rules and safety requirements for systems and their components
ISO 4413: Hydraulic fluid power - General rules and safety requirements for systems and their components
IEC 60204-1: Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 10218-1: Robots and robotic devices - Safety requirements for industrial robots - Part 1:Robots
etc.
We develop, design, and manufacture our products to be used
for automatic control equipment, and provide them for peaceful
use in manufacturing industries.
Use in non-manufacturing industries is not covered.
Products we manufacture and sell cannot be used for the purpose of
transactions or certification specified in the Measurement Act.
The new Measurement Act prohibits use of any unit other than SI units in
Japan.
Limited warranty and Disclaimer/
Compliance Requirements
The product used is subject to the following "Limited warranty and Disclaimer" and
"Compliance Requirements".
Read and accept them before using the product.
Limited warranty and Disclaimer
1. The warranty period of the product is 1 year in service or 1.5 years after
the product is delivered, whichever is first.
Also, the product may have specified durability, running distance or
replacement parts. Please consult your nearest sales branch.
2. For any failure or damage reported within the warranty period which is clearly our
responsibility, a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any
other damage incurred due to the failure of the product.
3. Prior to using SMC products, please read and understand the warranty terms
and disclaimers noted in the specified catalog for the particular products.
∗2) Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum pad
or failure due to the deterioration of rubber material are not covered by the limited warranty.
Compliance Requirements
1. The use of SMC products with production equipment for the manufacture of
weapons of mass destruction (WMD) or any other weapon is strictly prohibited.
2. The exports of SMC products or technology from one country to another are
governed by the relevant security laws and regulations of the countries involved
in the transaction. Prior to the shipment of a SMC product to another country,
assure that all local rules governing that export are known and followed.
Revision History
∗ A slide locking type manual override has been added.
∗ Number of pages has been increased from 96 to 112.
∗ The SJ1000 series has been added.
Edition D
∗ A low-profile SUP/EXH block has been added as an option.
∗ Number of pages has been increased from 112 to 120.
LZ
Edition E
∗ The SJ3000A and SJ4000 series have been added.
∗ Number of pages has been increased from 120 to 148.
D-G
Caution
∗2)
∗1)
,
RQ
AR
Advertisement
