Table of Contents
Advertisement
Time-setting options
en
Use the rotary selector to change the selection.
3.
Depending on the selection, change further settings.
Use the
button to start.
u
4.
The elapsed time appears in the display. The
settings and progress line can be seen.
Setting the type of heating and temperature
After the appliance is switched on, the set suggested
type of heating appears with the temperature. You can
start this setting immediately with the
want to set another type of heating, proceed as follows.
For other settings, you can change the values as
follows:
Example in the picture: Top/bottom heating at 180 °C.
Set the type of heating using the rotary selector.
1.
Touch the suggested temperature.
2.
Use the rotary selector to change the temperature.
3.
Use the
button to start.
u
4.
The set type of heating and the temperature are shown
in the display.
Rapid heat up
You can use the
button to heat up the cooking
c
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
4D hot air
:
Top/bottom heating
%
To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
until rapid heating is complete.
14
button. If you
u
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
Set the type of heating and temperature.
1.
Press the
button.
c
2.
The
symbol appears on the left next to the
c
temperature. The temperature indicator starts to fill in.
When rapid heating is complete, a signal sounds. The
symbol goes out. Place your dish in the cooking
c
compartment.
Notes
If a cooking time has been set, this runs
■
independently of rapid heating and counts down
immediately when the operation is started.
You can use the
button to check the current
l
■
cooking compartment temperature during rapid
heating.
Cancelling
Press the
c
button. The
the display.
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Time-setting option
Use
Timer
The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.
Cooking time
A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End
Set a cooking time and an end time. The
*
appliance switches on automatically so
that the operation ends at the desired
time.
Notes
A cooking time of up to one hour can be set exactly
■
to the minute.
A cooking time of over one hour can be set in 5-
minute increments.
Depending on which direction you turn the rotary
■
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
■
sounds.
c
symbol disappears from
Advertisement
Table of Contents
