Table of Contents
Advertisement
Operating the appliance
en
Selecting an operating mode
If you want to set an operating mode, the appliance
must be switched on.
Press the menu button.
1.
The operating modes menu opens.
Use the rotary selector to select the required
2.
operating mode.
Depending on the operating mode, different options
are available.
Use the ¿ arrow to reach the required operating
3.
mode.
Use the rotary selector to change the selection.
4.
Depending on the option, change different settings.
Press the Start/Stop button to start.
5.
Setting the type of heating and temperature
After the appliance is switched on, the suggested type
of heating appears with the temperature. You can start
this setting immediately with the Start/Stop button.
For other settings, you can change the values as shown
in the pictures.
Example: Top/bottom heating, 180 °C
Use the rotary selector to change the type of
1.
heating.
Press the arrow ¿ to switch to the temperature.
2.
Use the rotary selector to change the temperature.
3.
Press the Start/Stop button.
4.
The set type of heating and the temperature are
displayed in the display.
14
Rapid heat up
You can use the c button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
4D hot air
:
Top/bottom heating
%
To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
until rapid heating is complete.
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heat up function cannot be started.
Set the type of heating and temperature.
1.
Press the c button.
2.
The c symbol appears on the left next to the
temperature. The progress line begins to move across.
When rapid heat up is complete, a signal sounds. The
c symbol goes out. Place your dish in the cooking
compartment.
Notes
If a cooking time has been set, this runs
■
independently of the rapid heat up process and
counts down immediately when operation is started.
You can use the l button to check the current
■
cooking compartment temperature during rapid heat
up.
Cancelling
Press the c button. The c symbol disappears from
the display.
Advertisement
Table of Contents
