Table of Contents
Advertisement
Tested for you in our cooking studio
en
Use the rotary selector to select the category you
3.
require.
Touch the "Next" field.
4.
Use the rotary selector to select the food.
5.
Touch the "Next" field.
6.
Use the rotary selector to select the dish.
7.
Touch the "Next" field.
8.
Turn the rotary selector to set the weight.
9.
Touch the "Tip" field for information on the
Note:
best shelf position, cookware, etc. to use.
Press the
button to start.
u
10.
The setting has ended
A signal sounds. "Finished" appears in the status bar.
The oven stops heating. You can cancel the audible
signal early using the
0
If you are not satisfied with the cooking result, you can
increase the cooking time again. Touch the "Extend
cooking time" field. A cooking time is suggested.
However, you can change this if you want.
If you are satisfied with the cooking result, touch
"Finish". "Enjoy your meal" appears in the display.
Cancelling the program
Press the
button. All settings are deleted. You can
k
implement new settings.
Setting a later end time
For some dishes, it is possible to set a later end time.
You can find out how to set a later end time by looking
in the time-setting options. ~ "Time-setting options"
on page 14
Once you have set an end time, the display shows the
waiting time. The status bar shows the time at which
operation is to end. None of the settings can be
changed. Please remember that easily spoiled foods
must not be allowed to remain in the cooking
compartment for too long.
28
button.
JTested for you in our
cooking studio
H ere, you can find a selection of dishes and the ideal
T e s t e d f o r y o u i n o u r c o o k i n g s t u d i o
settings for them. We will show you which type of
heating and temperature are best suited to your dish.
You will get information on suitable cooking
accessories and the height at which they should be
placed in the oven. You will also get tips about
cookware and preparation methods.
A lot of steam can build up in the cooking
Note:
compartment when cooking food.
Your appliance is very energy-efficient and radiates very
little heat to its surroundings during operation. Due to
the high difference in temperature between the
appliance interior and the external parts of the
appliance, condensation may build up on the door,
control panel or adjacent kitchen cabinet panels. This is
a normal physical phenomenon. Condensation can be
reduced by preheating the oven or opening the door
carefully.
Silicone moulds
For the best cooking results, we recommend dark-
coloured metal baking tins/dishes.
Nevertheless, if you wish to use silicone moulds, follow
the manufacturer's instructions and recipes. Silicone
moulds are often smaller than normal baking tins.
Quantity and recipe specifications may vary.
Cakes and small baked items
Your appliance offers you a range of heating types for
the preparation of cakes and small baked items. You
can find the ideal settings for many dishes in the
settings tables.
Also refer to the notes in the section on allowing dough
to rise.
Only use original accessories supplied with your
appliance. These have been tailored to the cooking
compartment and the operating modes of your
appliance.
Shelf positions
Use the indicated shelf positions.
Baking on one level
When baking on one level, use the following shelf
positions:
Tall baked items: Level 2
■
Flat baked items: Level 3
■
If you are using 4D Hot air as the type of heating, you
can choose between levels 1, 2, 3 and 4.
Baking on several levels
Use 4D hot air. Baked items that are placed into the
oven on trays or in baking tins/dishes at the same time
will not necessarily be ready at the same time.
Advertisement
Table of Contents
