Table of Contents
Advertisement
SECTION 3 - INSTALLATION
SECTION 3 - INSTALLATION
pickering
pickering
TESTING OPERATION
After installation of the hardware and Pickering PXI Driver software package start the General Soft Front
Panel (GSFP) using the desktop icon or via the Start menu (Start Menu-> Pickering Interfaces Ltd ->
General Soft Front Panel).
Figure 3.2 - General Soft Front Panel Icon
A selector panel will appear, listing all installed Pickering PCI, PXI or LXI switch cards and resistor cards. Click
on the card you wish to control, and a graphical control panel is presented allowing operation of the card.
Panels can be opened simultaneously for all the installed cards.
Figure 3.3 - General Soft Front Panel Selector
More details how to use the GSFP can be found in the manual, via menu Help\Manual
REED RELAY MODULE 40-110/115/120/125
SOURCE SWITCHING MODULE 40-618A
Page 3.3
Page 3.3
Advertisement
Table of Contents
