Hyundai IONIQ 5 Owner's Manual page 42

Foreword / Starting your Electric vehicle
How to Connect DC Charger
1. Depress the brake pedal and apply the
parking brake.
2. Turn OFF all switches, shift to P (Park),
and turn OFF the vehicle.
3. Open the charging door.
For more details, refer to 'Electric
charging door' in this chapter.
Information
If you cannot open the charging door due
to freezing weather, tap lightly or remove
any ice near the charging door. Do not try
to forcibly open the charging door.
4. Check whether there is dust or foreign
substances inside the charging
connector and charging inlet.
5. Hold the charging connector handle
and connect it to the vehicle charging
inlet. Push the connector all the way
in. If the charging connector and
charging terminal are not connected
properly, this may cause a fire.
Refer to the manual for each type of
DC charger for how to charge and
remove the charger.
1-36
6. Check if the charging indicator light
(
the instrument cluster is turned ON.
Charging is not active when the
charging indicator light (
When the charging connector is not
ONE1Q011040 ONE1Q011040
connected properly, reconnect the
charging cable to charge it again.
During cold weather, DC charging
may not be available to prevent high
voltage battery degradation.
Information
To control the temperature of the high
voltage battery while charging, the
air conditioning is used to cool down
the battery. This may generate noise
or vibration from operation of the air
conditioning compressor and cooling
fan, but it is a normal condition when
charging the high voltage battery. Also,
the air conditioning's performance may be
degraded due to operation of the cooling
system to charge the high voltage battery.
This is a normal condition.
) of the high voltage battery on
ONE1Q011041 ONE1Q011041
) is OFF.