Hyundai IONIQ 5 Owner's Manual page 509

Highway Lane Change Assist (if
equipped)
Display and control
You can see the status of the Highway
Lane Change Assist function operation in
the Driving Assist view on the cluster. Refer
to "View Modes" section in chapter 4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.
Ready/Operating Ready/Operating
ONE1071105L ONE1071105L
(1) Highway Lane Change Assist
indicator
• Green on : Ready state
• Green blink : Operating state
• Grey on : Standby state
• White blink : Canceled state
(2) Lane line
The lane line is displayed in the same
way as the Highway Lane Change
Assist indicator (1) above. However,
if the function is in the standby state,
it displays whether the lane line is
recognized or not.
Standby/Canceled Standby/Canceled
ONE1071179L ONE1071179L
(3) Green arrow and shade
The green arrow is displayed when a
certain amount of time has passed
after the function has started
operating, and until the lane change
has completed.
(4) Message
• Message is displayed when the
function does not operate even
though the turn signal lever is used.
• Message is displayed when
the function is canceled while
operating.
07
7-115