Table of Contents
Advertisement
4. CONTROLS
•
Click on Communication in the left tree and you will now be able to change IP
address, subnet mask and gateway address.
Alternatively it is possible that the controller will obtain an IP address automatically. In
this case the controller has of course been connected to the local network through a
LAN cable to get the IP address automatically.
Be aware of that if you use an automatically obtained IP address that the IP address
will change whenever you switch the controller OFF and ON! You can always find the
new IP address the network has given to the controller by entering the Main Menu
directly in the MVC WEB controller.
•
Click on SUBMIT. You will be asked if you want to change the settings and you press
OK.
The controller will now reboot and will be ready after about 60 seconds.
37
Advertisement
Table of Contents
