Password Handling - Dantherm DanX 1 XD User Manual

4. CONTROLS
After having chosen the right user you have to give in the password:
See chapter password handling which possibilities the different users can get.
When you have entered the correct password the display now will change and show a
different Login icon.

4.3.1.1 Password handling

There are four different access levels in the program. In Level 0 (no password needed)
values can only be seen, not changed.
To change set points in the Time Program or set point, you have to use the level 1 password
for the operator to get access. With level 2, some points can be set into manual to test the
unit. All points can be changed on access level 3 by entering a service password, which your
Dantherm service technician has.
Operator
BuildingEngineer
SystemAdmin
* Please ask Dantherm
Important!
The passwords for entering the MVC WEB through the display are different from the
passwords used to access the controller through the network/browser. For these passwords
see chapter 4.10.3.
User Access level
1
2
3
Password
2222 Time Program, set point changes
3333 Points can be changed to manual
* Passwords can be changed
18
Possibilities