Main Menu; Points In Manual; Data Point List - Dantherm DanX 1 XD User Manual

4. CONTROLS

4.6 Main menu

Under this icon you have the following points and functions:
•

Points in Manual

•

Data Point List

•
Settings
•
Information
4.6.1 Points in manual
In this menu you will find all the points which have been set in Manual mode. Normally
points are only set in Manual mode when testing some functions of the unit and these points
should be set back to automatic immediately after the test has been finished. Before leaving
a unit it is always a good idea to look into this menu to make sure that it is empty. I there is
still a point in Manual you can change this point directly back to automatic in this menu.
4.6.2 Data point list
In this menu you will find all data points of the controller in alphabetic order.
If you are looking for a specific data point you can press the function button on the left side
of the display beside the triangle in the display. You will then the possibility to select some
special points like analog inputs, digital outputs and so on. This will make your data point list
shorter and easier to work with.
27