General Description - Suzuki GA413 Manual

4B1-2 PROPELLER SHAFT (4WD)
The front propeller shaft has a constant velocity joint at its rear end and a universal joint at the other end.
The rear propeller shaft is a three-part combination consisting of a shaft and two universal joints. It is connected
to the differential pinion through flanged connection and to the transmission output (main) shaft through a sliding
spline joint.
The AXC (axial plunger pump coupling) is equipped at the end of the front propeller shaft for vehicles with externally
mounted AXC (if equipped). The AXC acts to automatically distribute the optimum drive force to the front and rear
wheels while driving.
4

GENERAL DESCRIPTION

1. Front propeller shaft
2. Constant velocity joint
3. Rear propeller shaft:
Apply grease (99000-25030)
to spline part of propeller shaft.
4. Universal joint
5. AXC (axial plunger pump coupling)
(if equipped)
6. Bolt
7. Nut
8. To front differential
9. To rear differential
: Tightening Torque