Suzuki GA413 Manual page 93

6) For AXC built-in type:
Uncaulk and remove output front shaft nut by using special
tool.
Special Tool
(A): 09930-40113
7) For AXC built-in type:
Remove output front shaft rear bearing (1), output front shaft
spacer (2), and AXC (3).
8) Remove sprocket spacer (1), then push out and remove
sprocket bush (2).
9) Remove drive chain (3) and front drive sprocket (4).
10) For AXC built-in type:
Remove output front sprocket washer (2), output front sprocket
(3), sprocket needle bearing (4) and output sprocket bush (5)
from output front shaft (1).
11) Remove bolts (1) and then gear select lever (2).
MANUAL TRANSMISSION (4WD) 7A1-9