Suzuki GA413 Manual page 37

0B1-12 MAINTENANCE AND LUBRICATION (4WD)
1. Fuel pump assembly
2. Fuel filter
3. Suction filter (pump filter)
4. Fuel cut valve
5. Fuel sender (level) gauge
6. Fuel pump
ITEM 3-2
Fuel tank
Inspection
After removing fuel tank, check hoses and pipes connected to fuel
tank for leaks, loose connections, deterioration or damage. Also
check fuel pump assembly gaskets for leaks, visually inspect fuel
tank for leaks and damage.
Replace any damaged or malconditioned parts.
ITEM 3-3
Fuel Lines and Connections
Inspection
1) Visually inspect fuel lines and connections for evidence of fuel
leakage, hose cracking and damage. Make sure all clamps are
secure.
Repair leaky joints, if any.
Replace hoses that are suspected of being cracked.
2) Visually inspect gasket of fuel tank cap. If it is damaged or deteri-
orated, replace it with new one.
ITEM 3-4
Fuel Filter Replacement
WARNING:
This work must be performed in a well ventilated area and
away from any open flames (such as gas hot water heaters).
Fuel filter is a part of fuel pump assembly which is installed on fuel
tank.
Replace fuel filter with new one periodically. Refer to FUEL PUMP
ASSEMBLY in SECTION 6C for proper procedure.