Table of Contents
Advertisement
■Access by specifying the network number and the station number of a target station
A target device can be accessed via a relay station when the target device is connected within eight networks from a station,
on which an MES interface module is mounted, and can be identified by the network number and the station number (or CPU
number).
: Accessible, : No combination
Access route
CC-Link IE Controller Network
CC-Link IE Field Network
MELSECNET/H network
*3
Ethernet
*1 It can access to an RnENCPU only in a single CPU system.
*2 No combination with the MELSECNET/H network for process CPUs and safety CPUs.
*3 It is also supported by a QCPU (Q mode) for which the MELSOFT connection extended setting was set.
*4 Can be accessed only when using an RD81MES96N.
■Access by specifying the start I/O number of a module to be routed and the station number of
a target station
The following table shows the accessible routes to connect with a target device and a station on which an MES interface
module is mounted directly.
: Accessible, : No combination
Access route
CC-Link
*1 It can access to an RnENCPU only in a single CPU system.
*2 Can be accessed only when using an RD81MES96N.
Access target device type (series)
RCPU
QCPU (Q mode)
Program
C
Program
mable
Controller
mable
controller
module
controller
CPU/
CPU/
Process
Process
CPU/
CPU
Safety
CPU
*1,*2
(CPU No.1
(CPU No.1
(CPU No.1
to 4)
to 4)
to 4)
Access target device type (series)
RCPU
QCPU (Q mode)
Program
C
Program
mable
Controller
mable
controller
module
controller
CPU/
CPU/
Process
Process
CPU/
CPU
Safety
CPU
*1
(CPU No.1
(CPU No.1
(CPU No.1
to 4)
to 4)
to 4)
LCPU
FX5CPU
C
Program
Controller
mable
module
controller
CPU
(CPU No.1
*4
to 4)
LCPU
FX5CPU
C
Program
Controller
mable
module
controller
CPU
*2
(CPU No.1
to 4)
2 SPECIFICATIONS
2.2 Access Specifications for a CPU Module
2
FXCPU
FXCPU
31
Advertisement
Table of Contents
