8.2
Setup
System configuration
This section shows the setting for configuring a sample system including the following devices and software.
(1)
Device/Software
(1)
Programmable
controller system
(2)
Twisted pair cable and hub
(3)
Personal computer (shared in a server and
configuration personal computer)
Operating system
Relational database
Engineering tool
MX MESInterface-R
Configuration
software
• The IP address of an MES interface module is '192.168.3.3'.
• The IP address of a personal computer is '192.168.3.100'.
To set a setting of an CPU module, connect a personal computer and the CPU module with a USB cable.
8 OPERATION EXAMPLE
88
8.2 Setup
(2)
Product name/description
Main base unit
R35B
Power supply module
R61P
CPU module
R08CPU
MES interface module
RD81MES96
SD memory card
NZ1MEM-nGBSD ('n' indicates a number of
bytes.)
A cable and a hub compliant with IEEE802.3
1000BASE-T/100BASE-TX/10BASE-T
standards
A personal computer on which Windows
operates
Microsoft Windows 7 Professional Operating
System (64-bit version)
Microsoft Access 2010 (32-bit version)
GX Works3
SWnDND-GXW3 ('n' indicates its version.)
MES Interface Function
SW1DND-RMESIF-E
Configuration Tool
DB Connection Service
DB Connection Service
Setting Tool
DB
(3)
Reference
MELSEC iQ-R Module Configuration
Manual
Page 26 Accessible CPU modules
Page 69 Connectable SD memory cards (sold
separately)
Page 82 Connectable twisted pair cables
(sold separately)
Page 78 Operating Environment
GX Works3 Installation Instructions
GX Works3 Operating Manual
Page 74 Software configuration of MX
MESInterface-R
Page 84 INSTALLATION AND
UNINSTALLATION