Table of Contents
Advertisement
■Read Data at Trigger Judgment
Setting item
Access Type Selection
Access Interval Settings
Reading Target Data Setting (optional)
■Main-Processing
Setting item
Operation Settings at Main-
Processing Failure (optional)
DB Buffering Settings (optional)
8 OPERATION EXAMPLE
108
8.5 MES Interface Function Setting
Access Type
Access Interval
Reading Target Data
Setting content
At Processing Failure
Notification: "Not Set"
DB Buffering
No Buffering
DB Buffer Use Size
1.
Set each setting item according to the following table
and click the [Next] button.
Setting content
General Access
Seconds Specification: '1' second
The Data to be used in Trigger Condition only
1.
Set each setting item according to the following table
and click the [Edit] button.
2.
Click the [Operation Action] button in the "Action Type
Selection".
Advertisement
Table of Contents
